Imc-networks IE-IMCV Manual do Utilizador

IE-iMcV-MultiWay Operation Manual

6 DIP Switch configuration DIP Switch Name Description Default Setting 1 Dual Enable dual channel OFF 2 1+1 Provides 1+1 protection with

7 LED Operation Each IE-iMcV-MultiWay includes SFP and RJ-45 LEDs. (TX 1, TX 2) LNK/ACT FDX SFP A, SFP B OAM ACTIVE LNK FLT Glows

8 Configuration The IE-iMcV-MultiWay includes many features that are configurable via a serial/Telnet session (CLI) or through iView² (SNMP Managemen

9 Basic Device Configuration Using the CLI After running through an initial self test, the screen will display the following message: Press Enter for

10 This screen contains the following information and options: Saved and Current Values Saved values display the changes made during the current ses

11 sensitive and must not exceed eight characters or include spaces, and press Enter. This password will be requested whenever logging on. To remov

12 Deleting Community Strings To delete all community strings, perform the following: Press U. The "Are you sure you want to delete all future

13 DHCP Disable (Static IP Addressing) DHCP is disabled in the default configuration. Initially, modules are assigned a Static default IP Address of

14 Commands List (Space Bar) The IE-iMcV-MultiWay also includes several device-specific options. To access these options, press the Space Bar from

15 Command Description unit Unit global settings, frame size selection. Unit OAM enable must be enabled for AH and AG to function. port Displays

ii FCC Radio Frequency Interference Statement Class A (using 48V Telco type power) This equipment has been tested and found to comply with the limits

16 After the transfer process is complete, press Enter to load the configuration file: Once loaded into the device's SNMP memory area, the syst

17 Viewing Port Statistics To view port statistics on the IE-iMcV-MultiWay, enter ifstats. This will open a screen displaying information on packets

18 Version Entering version will display the version of the firmware operating the IE-iMcV-MultiWay. Settings should be saved prior to reboot. Reboot

19 Port Configuration Serial/Telnet sessions display port status as well as allowing configuration of some port features. Type port and press Enter t

20 Advertise FlowC and Force FlowCtrl - This is the FlowControl feature. • When using FlowControl functionality on any port, enable Global FlowContro

21 Operational Mode Configuration There are two modes of operation that can be configured through the Serial/Telnet session: Mode 1, which supports a

22 Operation Mode 2 Port Based Xtra Tagging Any port can be configured for extra tags on the frames. Press the down arrow on the computer keyboard t

23 VLAN Configuration The ports can be assigned as a trunk or access port. When configuring a trunk port, an Ethertype can be user-defined (a trun

24 OAM AH (Operation and Administration Management) Two modes of operations control the OAM function, Passive and Active. Passive mode is the defau

25 Using iView2 iView² is IMC Networks’ management software, providing network management in an easy to use Graphical User Interface (GUI). Once iV

iii Table of Contents FCC Radio Frequency Interference Statement ... ii Warranty...

26 The following functions can be performed via iView2: Function Description Unit Configuration Display/modify unit information. Port Configuration

27 Port Configuration Select Port Configuration to display/modify port information including description and flow control:

28 Tables Select tables to display a screen from which to select the specific statistics to be viewed: Select Unit and Port Tables to display the fo

29 Enter a VLAN ID between 1 and 4,094; possible priority settings are 0 (lowest priority) through 7 (highest priority). Advanced Select Advanced to

30 OAM AH Select OAM AH to display the following screen and monitor the status, configuration, loopback, event log and statistics:

31 From the above screen, select Configuration to display state and event configuration information as well as OAM supported functions: Select Loopb

32 Select Event Log to display the OAM event log showing changes that have occurred via OAM configuration: Select Statistics to display OAM statisti

33 OAM CFM Select OAM CFM to display the following screen and perform administrative control for Maintenance Domains (MDs), Maintenance Assocations (

34 For the first-time configuration, the user must first create an MD, then an MA, then local and peer MEPs can be added. To create an MD, select th

35 For the first configuration, create an MA after the MD. Select "Configure MA" to display the OAM CFM Maintenance Association Configurat

iv RS-232 Serial Console Port...45 Product Applications ...

36 Select the MD, MA, enter the MEP ID, select the appropriate type, port and direction, and select the Primary VID, if applicable. To cancel the ME

37 The MEP Instance Configuration page offers more details about an individual MEP as shown below: From this screen, the user can perform the follow

38 Agent Info Select Agent Info to display SNMP agent data:

39 Connecting the IE-iMcV-MultiWay to an iMcV-Giga-FiberLinX-II If the IE-iMcV-MultiWay is being set up as a Remote (CPE) to a Host connection with a

40 Configuration File Save/Restore Function Requirements The Configuration File Save/Restore Function allows a user the ability to backup all the con

41 Saving a Configuration File to Disk: From the Administration Tab in iView2 (iConfig view) click the Save Configuration button: The user is prom

42 The user is prompted to enter any notes to the header of the saved file for future reference when uploading the file through iView2 (iConfig view)

43 Uploading a Saved Configuration File through iView2 (iConfig view) From the Administration Tab in iView2 (iConfig view) click the Upload Configura

44 SFP Ports The IE-iMcV-MultiWay SFP ports support gigabit fiber SFPs and 100Mbps fiber SFPs, with or without Digital Diagnostics Monitoring Inform

45 RJ-45 Data Port Pinout The following table lists the pin configuration for the RJ-45 Data connector. Pin Signal Name 1000M Signal Direction 10/

1 About the IE-iMcV-MultiWay The IE-iMcV-MultiWay is a CPE device, available as a modular device providing two fixed 10/100/1000Base-T copper ports

46 Product Applications For a detailed description of the product applications, please refer to the IE-iMcV-MultiWay data sheet at http://www.imcnetw

47 Glossary The following are terms and phrases used within this manual, or which are found in documents associated with this equipment. Term/Acronym

48 Term/Acronym Definition MDI/MDIX Media-Dependent Interface/ Media-Dependent Interface Crossover. The ability of an Ethernet port to automatically

49 Troubleshooting If a fiber connection cannot be established, perform the following to make sure that the fiber transceivers on the IE-iMcV-MultiWa

50 Specifications Ethernet Connections • SFP 1000 Base-X • SFP 100 Base –FX • SFP 10/100/1000 Copper (SGMII) • 10/100/1000 BaseT (Fixed Copper ports)

51 IMC Networks Technical Support Tel: (949) 465-3000 or (800) 624-1070 (in the U.S. and Canada); +32-16-550880 (Europe) Fax: (949) 465-3020

52 Fiber Optic Cleaning Guidelines Fiber Optic transmitters and receivers are extremely susceptible to contamination by particles of dirt or dust, wh

53 Electrostatic Discharge Precautions Electrostatic discharge (ESD) can cause damage to any product, add-in modules or stand alone units, containing

54 Notes

55 Certifications CE: The products described herein comply with the Council Directive on Electromagnetic Compatibility (2004/108/EC). Europea

2 About IE-iMcV-MultiWay Features and Configuration The IE-iMcV-MultiWay offers a full feature set including Auto Negotiation, Selective Advertising,

19772 Pauling y Foothill Ranch, CA 92610-2611 USA TEL: (949) 465-3000 y FAX: (949) 465-3020 www.imcnetworks.com © 2011 IMC Networks. All

3 When using iView2, the IE-iMcV-MultiWay can be fully managed without an IP address using a secure management channel. However, an IP address can b

4 About iView2 (iConfig view) iView2 (iConfig view) is an in-band utility created by IMC Networks, used for SNMP configuration for IMC Networks’ SNM

5 DIP Switch Selectable Mode Configuration The IE-iMcV-MultiWay can be configured in one of the following ways via DIP Switch settings (see page 6):