Imc-networks Management Module SNMP Manual do Utilizador

SNMP Management Module Operation Manual

7 the iView² CD. For information regarding the use of the iConfig utility, refer to the iConfig utility help file. About Serial Port Configuration T

8 Saved Values This section displays changes made during current session: • IP Address (MUST be assigned during initial configuration) • Subnet Mask

9 device, pressing Enter after each. The default gateway can also be assigned, if desired (press Enter to skip). When finished, press Enter, then t

10 function enables ALL of the traps. To selectively activate and deactivate traps, use iConfig. iConfig Traps allow greater control using the Trap

11 If the download is interrupted, do not reset the module or reboot the SNMP Management Module; doing so can corrupt the PROM and render the module

12 Downloading Files Refer to Device-Specific Options— Downloading Files. Using iView² iView² is a network management application for IMC Networks’ i

13 UMA (Unified Management Agent) Centralized management makes practical sense for networks of all sizes, especially service provider networks tha

14 Easy Upgrades with the Unified Management Agent • Upgrade one or multiple Host (CO) or Remote (CPE) devices with just a few mouse clicks. Refer

15 Telnet Session With the Unified Management Agent, users can also manage multiple devices installed in, or connected to, an iMediaChassis via a Tel

16 System Requirements To run iView², the management PC must be equipped with the following: • 29 MB free disk space, 64 MB RAM • Windows NT 4.0 Se

ii FCC Radio Frequency Interference Statement This equipment has been tested and found to comply with the limits for a Class B computing device, purs

17 IMC Networks Technical Support Tel: (949) 465-3000 or (800) 624-1070 (in the U.S. and Canada); +32-16-550880 (Europe) Fax: (949) 465-3020

18 Electrostatic Discharge Precautions Electrostatic discharge (ESD) can cause damage to your add-in modules. Always observe the following precautio

19 Safety Certifications UL/CUL: Listed to Safety of Information Technology Equipment, including Electrical Business Equipment. CE: The produ

20 Notes

19772 Pauling • Foothill Ranch, CA 92610-2611 USA TEL: (949) 465-3000 • FAX: (949) 465-3020 www.imcnetworks.com © 2008 IMC Networks. All

iii Table of Contents FCC Radio Frequency Interference Statement ...ii Warranty...

1 About the SNMP Management Module The SNMP Management Module includes two twisted pair ports, one for management and one reserved for future use. T

2 SNMP Management Module LEDs Each SNMP Management Module features several LEDs. The LED functions are: LNK/ACT FDX/COL TEMP PS FAN A / FAN B G

3 TABLE: Configuration Options IView2 Serial Telnet iConfig VLANS 9 9 Modes 9 9 IP 9 9 9 9 Subnet Mask 9 9 9 9 Default Gateway 9 9 9 9 Bandwidth

4 1. Open a session in iConfig with a device you want to administer. 2. Choose the Administration tab. 3. Click the Save PROM File button. 4.

5 8. After rebooting, set the SNMP Write Lock switch back to NORMAL. The previously made settings to the application modules will be active. NOTE

6 About iConfig iConfig is an in-band configuration utility (in iView²) that lets users quickly and easily complete the first stages of SNMP configur