IMC Networks PSE-McBasic, TX/FX-SM1310/PLUS-ST Manual de Instruções Página 1

PSE-McBasic Operation Manual

7 NOTE FiberAlert will not function when single-strand fiber is connected. 4W Glows green when Powered Device consumes 3.84 watts to 4 watts of powe

8 Installation Troubleshooting To test the PSE-McBasic during installation, first test the fiber and twisted pair connections with all troubleshootin

9 IMC Networks Technical Support Tel: (949) 465-3000 or (800) 624-1070 (in the U.S. and Canada); +32-16-550880 (Europe) Fax: (949) 465-3020

10 Fiber Optic Cleaning Guidelines Fiber Optic transmitters and receivers are extremely susceptible to contamination by particles of dirt or dust, wh

11 Electrostatic Discharge Precautions Electrostatic discharge (ESD) can cause damage to any product, add-in modules or stand alone units, containing

12 Safety Certifications UL/CUL: Listed to Safety of Information Technology Equipment, including Electrical Business Equipment. CE: The produ

19772 Pauling • Foothill Ranch, CA 92610-2611 USA TEL: (949) 465-3000 • FAX: (949) 465-3020 www.imcnetworks.com © 2010 IMC Networks. All

ii FCC Radio Frequency Interference Statement This equipment has been tested and found to comply with the limits for a Class B computing device, pursu

iii Table of Contents FCC Radio Frequency Interference Statement ...ii Warranty...

1 About the PSE-McBasic The PSE-McBasic functions as a fiber-to-twisted pair media converter, as well as a 802.3af-compliant, Power Sourcing Equipmen

2 single-strand fiber products use optics that transmit and receive on two different wavelengths, deploy single-strand fiber products in pairs, or co

3 Link Integrity During normal operation, link integrity pulses are transmitted by all point-to-point Ethernet devices. When an IMC Networks media c

4 **WARNING** Enable FiberAlert on one side of a media conversion only. Enabling it on both sides would keep both transmitters off indefinitely. Us

5 The following diagram shows a typical application and with three possible configurations. End-to-End Connection Switch TX/FX Half-Duplex Conf

6 About the LED Indicators The PSE-McBasic features multiple diagnostic LEDs. The diagram below shows the location of the LEDs. The LED functions a