IMC Networks IE-MiniFiberLinX-II, TP-TX/SSFX-MM1310-SC (1550rcv) Manual de Instruções

IE-MiniFiberLinX-II Operation Manual

7 Regardless if there is a break in segment 1, 2 or 3, the link will drop on the switches at both ends. The link fault is passed through the media co

8 data, the Loopback feature can also be set to clear the multicast bit. This allows the looped data to avoid being blocked by any multicast settings

9 Configuration The IE-MiniFiberLinX-II includes many features that function automatically or are configurable via iView², iConfig, or a serial/Telnet

10 Main Configuration Screen Press Enter, at the prompt, to display the main configuration screen. The following displays are available: Saved Values

11 Command List I = Enter New Saved Parameter Values P = Change Password T = New Trap Destination K = Remove ALL Trap Destinations C = New Communi

12 Removing Trap Destinations To remove all trap destinations, press K. Press Y to continue to confirm or N to abort and then, press Enter. To selec

13 Rebooting the Unit To reboot the IE-MiniFiberLinX-II, type reboot. Enabling/Disabling DHCP To toggle DHCP on the IE-MiniFiberLinX-II between enabl

14 config Allows VLAN and transparency mode configurations. accounts Allows the addition of new users. sysdescr Allows the editing of sysName, sysDesc

15 Viewing Port RMON Statistics To view port RMON (Remote MONitoring) statistics on the IE-MiniFiberLinX-II, enter rmstats. This will display RMON

16 NOTE In the examples shown, ports are referred to as how they appear on the unit itself. Some screens may show TX and FX for the port titles. In

i FCC Radio Frequency Interference Statement This equipment has been tested and found to comply with the limits for a Class A computing device, pursua

17 Advertise FlowC and Force FlowCtrl - This is the FlowControl feature. • When using FlowControl functionality on any port, enable Global FlowControl

18 How to configure the IE-MiniFiberLinX-II for management on the copper port 1. Configure the device to be set in the default mode. If unsure of the

19 Press the Space Bar once for access to additional commands. Type config then press Enter to set the operation mode.

20 Press Enter for other options. Press 2 to change to Default Plus Mode, then press Enter. Press Y to allow TX management, then press Enter.

21 Press S to save the configuration. Reboot the device and use the SNMP software to manage the device over the copper port. Mode Two - Transparen

22 Mode Three - Transparency with Tagged Management This mode will pass all tagged and untagged customer traffic. Management traffic must be tagged.

23 Mode Four - Transparency with Extra Tagging (or Q-in-Q) This mode is designed to either pass all customer traffic with the defined extra tag (Q-in-

24 Mode Six - Port VLAN This mode tags all customer traffic received by the copper port going to the fiber port, untagging traffic conversely. This

25 Sysdescr offers the options of assigning a system name, System Contact System Location, Unit Description and individual Port names. Enter a descri

26 802.1p Base Pri Set the level of 802.1p base priority (3 or 4). The IE-MiniFiberLinX-II has two outgoing queues; one for high priority traffic and

ii Table of Contents FCC Radio Frequency Interference Statement ...i Warranty...

27 Administrator This role can perform Operator role functions, add/delete accounts, and use the cleandb command. Account access through the serial p

28 A navigation bar on the top of the screen displays the options for configuring the IE-MiniFiberLinX-II connection. These options include the foll

29 The Configuration/Remote Screen Depending on whether the IE-MiniFiberLinX-II is being set up as a standalone or in a Host/Remote connection, the Co

30 configurations, IP Address configuration and SNMP agent settings. The configuration file can be transferred from the unit to a PC and saved to dis

31 Configuration File Basics Saving a Configuration File to Disk: From the Administration Tab in iConfig click the Save Configuration button: The

32 The user is prompted to enter any notes to the header of the saved file for future reference when uploading the file through iConfig: After the

33 Uploading a Saved Configuration File through iConfig From the Administration Tab in iConfig click the Upload Configuration button: The user wil

34 Uploading a Saved Configuration File through TFTP From the commands list in the CLI (Serial or Telnet) run the download command by typing in downlo

35 After the transfer process is complete the user will be prompted to press the Enter key again to load the configuration file: Once loaded into

36 Product Applications The IE-MiniFiberLinX-II comes with a variety of features for different network environments. When used with different types o

1 About the IE-MiniFiberLinX-II The IE-MiniFiberLinX-II is an optical demarcation network interface device, allowing fiber network operators to connec

37 Modes of Operation The following are application examples of Operation Modes for the IE-MiniFiberLinX-II. There are six modes of operation that ca

38 Mode Three - Transparency with Tagged Management This mode will pass all tagged and untagged customer traffic. Management traffic must be tagged. I

39 Mode Five - VLAN Filter This mode is designed to only pass traffic with any of the 32 tags that have been identified in the user-defined table. No

40 Troubleshooting If a fiber connection cannot be established, perform the following to make sure that the fiber transceivers on the IE-MiniFiberLinX

41 IE-MiniFiberLinX-II Modes of Operations For enlarged version go to IMC Networks website: http://www.imcnetworks.com/Products/12_IE-MiniFiberL

42 The Agent Info Screen Information about the SNMP Agent software managing the IE-MiniFiberLinX-II is contained on this screen. Specifications Input

43 Fiber Optic Cleaning Guidelines Fiber Optic transmitters and receivers are extremely susceptible to contamination by particles of dirt or dust, whi

44 Safety Certifications UL/CUL: Listed to Safety of Information Technology Equipment, including Electrical Business Equipment. CE: The produc

19772 Pauling • Foothill Ranch, CA 92610-2611 USA TEL: (949) 465-3000 • FAX: (949) 465-3020 www.imcnetworks.com © 2009 IMC Networks. All rig

2 Network Node Manager. Refer to the iView² help files for information regarding configuring and managing the IE-MiniFiberLinX-II. iView² supports th

3 Installation To install the IE-MiniFiberLinX-II into a network environment, connect the proper twisted-pair and fiber cables. In a standalone confi

4 Powering Options The IE-MiniFiberLinX-II powering options include AC and DC power as well as Power over Ethernet, functioning as a PD compliant wit

5 The twisted pair port on the IE-MiniFiberLinX-II can also be manually set for 10 Mbps or 100 Mbps operation and for Half- or Full-Duplex (i.e. 10 Mb

6 Using LinkLoss and FiberAlert In a typical central site to remote site media conversion, it is recommended the LinkLoss and FiberAlert features are